Skip to main content

Part 4: Software Configuration

Configure all software systems and network connectivity.

What You'll Find Here​

This section covers:

  • ✅ Power-on procedures and startup sequence
  • ✅ Network configuration (switch, PDU, uplinks)
  • ✅ HCI software setup and cluster initialization
  • ✅ EDC Health Monitor dashboard and configuration

Purpose​

Configure and initialize all software systems for operation.

This section guides all users through powering on the EDC, configuring network infrastructure, setting up the HCI cluster, and enabling monitoring systems. This is required for all editions.

Section Contents​

Power and Startup​

Power connection, PDU configuration, and boot sequence.

Network Configuration​

Switch setup, port assignments, and uplink connectivity.

HCI Software​

Hyperconverged infrastructure setup and cluster initialization.

EDC Health Monitor​

System dashboard, cluster monitoring, network tools, and device management.

Prerequisites​

Before using this section:

All users:

NUC edition users ONLY:

HR-01 edition users:

  • ✅ Skip Part 3 (nodes pre-installed)

What's Next?​

After software configuration:

👉 Continue to Part 5: Operations for daily operations and maintenance