Skip to main content

NodeWeaver

HiveRadar is authorized to pre-install NodeWeaver on the P-EDC. When it does, the cluster, switch trunking and licence are set up before shipping, and the details are on the NodeWeaver page of your Access & Configuration Sheet.

Needs internet to activateYes. Pre-installed units are activated before shipping
Address and loginNodeWeaver page of your Access & Configuration Sheet
SwitchNode data ports set to a tagged VLAN (802.1Q) trunk

Log in​

  1. Connect a laptop to a free switch port (see First Network Access).
  2. Open the management address from your Access & Configuration Sheet in a browser. Continue past the self-signed certificate warning.
  3. Log in and change the initial password.
  4. Check all nodes show as online and healthy before creating workloads.

For everything beyond first login, such as creating virtual machines, storage and networking, use the NodeWeaver documentation.

Connect it to HiveSight​

HiveSight reads NodeWeaver through its API (OpenNebula XML-RPC). In the HiveSight setup wizard, choose NodeWeaver and enter:

  • The cluster leader's address. HiveSight uses port 2633, or 443 through the NodeWeaver portal
  • A NodeWeaver user and password. The built-in API user works as-is

One connection covers the whole cluster. See HiveSight Setup.

Help​

Contact your partner first. They involve NodeWeaver when needed.